Category Archives: Uncategorized

Powerful steel strapping tool

Signode PRHR – 114

The PRHR-114 is among the most powerful tools.

This powerful pneumatic combo tool can pull up to 1600 lbf of tension on the strap. At 34 lb, it is a slightly heavy tool and can be counterbalanced for stationary applications. It is designed for ease of use and low maintenance compared to other tools in its segment. It is perfect for applications involving bundled tubes, slit coils, and irregulars-shaped loads. It is a proven performer in the steel service industry. The feed wheel is designed for easy and quick replacement.

This combination tool uses push-type seals. It features minimal wear parts, which helps minimize maintenance and increases tool lifespan. The PRHR-114 is among the most powerful tools.

1/2″-5/8″ polyster strapping tool

The Fromm P328 is a battery powered strapper designed for polyester (PET) strapping of width 1/2” to 5/8”. It is the toughest strapping tool according to Fromm. It features a series of new technologies that make it the perfect tool for packaging applications. Weighing just 8.7 lbs, it can pull adjustable tension of 56 lbs to 585 lbs which makes it a highly versatile tool. It increases packaging efficiency and ease and offers a completely new experience.


Technical Specifications
 Strapping Quality: Embossed & Plain Polyester & Polypropylene
 Strapping Width: 1/2” to 5/8”
 Strapping Thickness: 0.016” to 0.041”
 Weight: 8.7 lbs (4.2 kg)
 Tension: Adjustable 56 lbs (250N) to 585 lbs (2600N)
 Seal: Friction weld
 Seal Efficiency: 75%
The P328 is a lightweight battery-run poly strapping that can be easily moved around the plant. The 5 Ah batteries provide longer runs. The latest brushless motor further increases efficiency and lasts longer due to lesser wear and tear.
More Convenient Strapping. This battery powered strapper makes strapping much more convenient than ever before. The newly designed single base allows the tool to easily slide off after completing strapping smaller and round packages. On the other hand, other tools can get stuck when used with similar
packages. It is also easier to cycle the Fromm P328. Just press the tensioning button and the polyester strapping will pull the package tight to the desired tension. The tool will automatically release, weld, and cut the strap at the set tension. The new tool also does away with the earlier lever.
Other Options
There are a few other options that can be used in place of this battery powered strapper. The From P355 is a pneumatic poly bander that accepts 3/8” to 5/8” straps and pulls adjustable tension of 90 lbs to 470 lbs. The P300 is an electric sealless strapping tool that pulls 3/8” to 5/8” straps and pulls up to 360 lb tension.

The Fromm P380 is a pneumatic tool for 1/2” to 3/4” poly strapping and is another tool generating adjustable tension. The MIP-380 is a heavy-duty hand tool for poly straps of width up to 3/4”. The ASC 350 is another option for PET straps of width 1/2” and 5/8”.
Tool Repair & Accessories
All the common wear parts and accessories for the P328 are readily available for online order. Besides, professional tool repair and maintenance services are also available from experienced technicians. The tool can be repaired and returned with quick turnaround.

Less weight combination steel strapping tools

FROMM A335 is one of the rare few combination tools in the industry that weigh so less. This tool is perfect for strapping flat packages. It is a highly reliable tool that stands out for its reliability and ruggedness. It can be used in the most extreme working conditions without any issues.

Best steel strapping tool

The Fromm A335 (Click on the link) is a manual sealless combination tool designed for steel straps is the best steel strapping tool.

Repair strapping tools

The Fromm A335 is a manual sealless combination tool designed for steel straps of width 1/2” to 3/4". It is a proven, universal sealless strapping tool that stands out for its reliability and ruggedness. It is a lightweight tool that weighs just 8.9 lbs that is designed for ease of service.
The tool accepts both regular duty and high-tensile steel straps. The combo tool pulls and maintains tension without any loss, making it perfect for even heavy duty applications.

Tool Repair
All the common wear parts for the Fromm A335 can be easily ordered online. You can also send your tool for regular maintenance or repair to experienced and certified factory-trained technicians. The tool can be repaired and returned with quick turnaround.

Steel strapping tools

It is a manual sealless steel strapping combination tool designed for steel straps of width 1/2” to 3/4 “&quote;.

The Fromm A335 offers ease of use and fast operation. It delivers a sealless joint that helps in increasing cost savings. The cost of operation can be reduced by up to 10% due to the absence of seals. The tool’s lightweight makes it perfect for horizontal and stationary applications. The manual sealless joint creates a seal that is highly efficient (approximately 80%). Overall, this seal efficiency is higher compared to joints that use separate seals.

Grippack 114 Sealer/Tensioner

Highly Versatile Plastic Strapping Combination Tool

Orgapack OR-T 250 Battery Powered Highly Versatile Plastic Strapping Combination Tool

The Orgapack OR T 250 is a battery-powered combination poly strapping tool designed for accepting straps of width 1/2 inch to 5/8 inch. It is a highly versatile tool that can generate adjustable tension and can run in different modes including manual, semi-auto, full-auto, and soft-corner modes. In fact, it is the most versatile plastic strapping tool currently available in the market. The tool is powered by latest lithium-ion BOSCH battery technology and can deliver reliable 400 cycles per charge.

The ORT 250 is Swiss-made and can run both polypropylene (PP) and polyester (PET) straps. It weighs just 8.9 lbs and has a well-balanced ergonomic design to help minimize hand fatigue. It seals using sealless friction weld system. It is designed for reliable performance and consistency.

Technical Specifications

  • Strapping Quality & Size: 1/2”5/8” poly strap (PET and PP) of thickness 0.019”-0.040”
  • Weight: 8.9 lbs
  • Adjustable Tension: 90-330 lbs (soft) and 200-560 lbs (normal)
  • Capacity: 400 cycles per battery charge
  • Recharge Time: 20 to 45 minutes
  • Seal Type: Friction Weld (Sealless)

Reliable & Cost-Saving Sealing

The OR-T 250 helps increase cost savings by replacing the need for steel strapping tools, expensive steel straps, and metal seals. It delivers inexpensive sealless joints to further reduce the cost of strapping operations. It helps achieve this without compromising on the efficiency of the joint. There is no reduction in seal security and efficiency compared to using metal seals.

With the friction weld seals there is no risk of rusting or breaking down during shipment. Besides, plastic strapping can be used in wet, humid, chemical or harsh conditions.

Features of Orgapack OR-T 250

The main features of the OR T 250 battery tools for polyester strapping are as following:

  • Reliable, non-rusting, and cost-saving sealless friction weld technology
  • Adjustable tension in two different modes up to 560 lbs
  • Light weight (8.9 lbs) and ergonomically designed tool
  • Completes up to 400 cycles per charge
  • Features latest Li-ion battery technology
  • Charges within 20-45 minutes

The OR-T 250 can tension, seal and cut in a single press of the button. In fact, it takes not more than 3 seconds for completing a cycle, thus boosting efficiency and productivity.

Accessories & Tool Repair

The ORT 250 is a lightweight poly strapping tool. However, a few accessories are also available to make its strapping applications easier and faster. It is already a high-performance, highly versatile tool, but with these additions, it can further help increase productivity.

Maintenance and tool repair services are also available for this Orgapack tool from experienced and factory-certified technicians. Your tool will be fixed or rebuilt in the shortest-possible turnaround time.

Fromm A461 Pneumatic Sealer for Steel Strapping

Fromm A461 Pneumatic Sealer for Steel Strapping

The A461 is a Fromm pneumatic sealer designed to accept steel straps of width 3/4”-1-1/4”. It weighs just 9.3 lbs and makes sealing extremely easy due to its pistol-grip design. Ergonomically designed, it can be used with a single hand. It requires just a pull to apply a flawless and secure seal. Its unique safety system further helps prevent defective seal joints because of operator faults. This sealer applies a reliable double notch upcut joint.

Features of Fromm A461

  • Light weight & pistol grip enable single-hand operation.
  • Delivers a reliable and secure double notch upcut joint in single pull.
  • Special seal safety system prevents defective seal joint.
  • High seal efficiency.
  • High reliability and ease of use.
  • Ergonomic and well-balanced design also helps reduce operator fatigue.

The steel strapping tool is available in two handle configurations:

  • N-version – Handle at 90-degree to the strapping.
  • P-version – Handle parallel to the strapping.

The A461 Fromm pneumatic sealer is designed for strapping round or irregular-shaped loads, or packages with small surface area. It is a highly reliable, robust, and cost effective tool.

Technical Specifications

The main list specifications of the Fromm A461 are as following:

The A461 Fromm pneumatic sealer is designed for easy single-hand application. It applies the seal in a single swift action. The tool has undergone regular improvements over the years. It can also be suspended with a suspension bracket on a spring loaded balancer for stationary applications.

Because this steel strapping tool is a sealer it requires a tensioner to complete the applications. The Fromm A452 is an ideal match. Both these tools from the same brand are perfect for strapping difficult-to-strap and large loads including pipes, timber, metal beams, round, and odd-shaped loads. The tensioner can generate high tensioning of up to 1,900 lbs. This makes it perfect for strapping heavy loads.

Repair & Parts

The Fromm A461 has a service-friendly design. It can be easily repaired and similarly parts can be replaced quickly. All its replacement and wear parts are easily available for online order. This makes tool repair both swift and simpler. The common wear parts for this tool include cutting jaw and notching knife, which are easily available.

Signode PRHR-114 Pneumatic Push-Type Combination Steel Strapping Tool

Signode PRHR-114 Pneumatic Push-Type Combination Steel Strapping Tool

The Signode PRHR-114 is a pneumatic combination strapping tool designed for steel straps of width 1-1/4”. It generates up to 1,600 pounds of tension and uses double reverse notch seals. This push-type combination tool is a proven performer for irregular-shaped and round objects. It weighs 29 pounds and is recommended to be counter balanced for stationary applications.

There are many reasons why this Pneumatic Push style tool is better than the competition. It is a highly durable, easy-to-use and low-maintenance steel strapping tool. it has minimal wear parts, which combined with its durable construction makes it, a long-lasting tool.  It is capable of pulling up to 1,600 lbs of tension. This also makes it one of the most powerful combination pneumatic tools.

Technical Specs

The main technical specifications of the PRHR-114 are as following:

  • Strapping Type & Size: 1-1/4” steel strapping (thickness 0.025” to 0.031”)
  • Weight: 29 lbs
  • Tensioning Force: 1,600 lbs
  • Joint: Double reverse notch

Applications

The Signode PRHR-114 is the perfect tool for heavy-duty applications. it is ideally suited for strapping bundles and slit coils. Its feedwheel is designed to be easily replaceable. All it takes is a single-button operation to complete a strapping cycle. The combination tool has a much longer lifecycle than its manual counterparts.

Features

The main features of the Pneumatic Push style are as following:

  • It is extremely easy to use. application involves nothing more than pressing a button.
  • The PRHR-114 has an ergonomic design which makes it easy to handle and use. Once suspended, it is easy to handle and reduces operator fatigue.
  • Its single-lever operation means quick operation, saving time and increasing efficiency.
  • The feedwheel is specially designed for easy and quick replacement.
  • The steel strapping tool has minimal wear parts, which further makes it a low-maintenance tool.
  • Perfectly suited for strapping irregular-shaped, round and angular loads.
  • An all-metal-alloy construction ensures low maintenance, high durability and longer lasting lifespan.

All the wear parts, replacement parts, and accessories for the PRHR-114 are readily available for ordering online. The common wear parts include ball bearing, filter assembly, rotor, front end and back end plates, idler, idler carrier assembly, and vane. As a combo tool, this tool is considered better than other separate tools. When using a separate tensioner, it is recommended to choose one that compliments with the signode grip pack sealer.