Tag Archives: accessories

Highly Versatile Plastic Strapping Combination Tool

Orgapack OR-T 250 Battery Powered Highly Versatile Plastic Strapping Combination Tool

The Orgapack OR T 250 is a battery-powered combination poly strapping tool designed for accepting straps of width 1/2 inch to 5/8 inch. It is a highly versatile tool that can generate adjustable tension and can run in different modes including manual, semi-auto, full-auto, and soft-corner modes. In fact, it is the most versatile plastic strapping tool currently available in the market. The tool is powered by latest lithium-ion BOSCH battery technology and can deliver reliable 400 cycles per charge.

The ORT 250 is Swiss-made and can run both polypropylene (PP) and polyester (PET) straps. It weighs just 8.9 lbs and has a well-balanced ergonomic design to help minimize hand fatigue. It seals using sealless friction weld system. It is designed for reliable performance and consistency.

Technical Specifications

  • Strapping Quality & Size: 1/2”5/8” poly strap (PET and PP) of thickness 0.019”-0.040”
  • Weight: 8.9 lbs
  • Adjustable Tension: 90-330 lbs (soft) and 200-560 lbs (normal)
  • Capacity: 400 cycles per battery charge
  • Recharge Time: 20 to 45 minutes
  • Seal Type: Friction Weld (Sealless)

Reliable & Cost-Saving Sealing

The OR-T 250 helps increase cost savings by replacing the need for steel strapping tools, expensive steel straps, and metal seals. It delivers inexpensive sealless joints to further reduce the cost of strapping operations. It helps achieve this without compromising on the efficiency of the joint. There is no reduction in seal security and efficiency compared to using metal seals.

With the friction weld seals there is no risk of rusting or breaking down during shipment. Besides, plastic strapping can be used in wet, humid, chemical or harsh conditions.

Features of Orgapack OR-T 250

The main features of the OR T 250 battery tools for polyester strapping are as following:

  • Reliable, non-rusting, and cost-saving sealless friction weld technology
  • Adjustable tension in two different modes up to 560 lbs
  • Light weight (8.9 lbs) and ergonomically designed tool
  • Completes up to 400 cycles per charge
  • Features latest Li-ion battery technology
  • Charges within 20-45 minutes

The OR-T 250 can tension, seal and cut in a single press of the button. In fact, it takes not more than 3 seconds for completing a cycle, thus boosting efficiency and productivity.

Accessories & Tool Repair

The ORT 250 is a lightweight poly strapping tool. However, a few accessories are also available to make its strapping applications easier and faster. It is already a high-performance, highly versatile tool, but with these additions, it can further help increase productivity.

Maintenance and tool repair services are also available for this Orgapack tool from experienced and factory-certified technicians. Your tool will be fixed or rebuilt in the shortest-possible turnaround time.

Signode PNSC-2 Pneumatic Push-Type Combination Tool for Steel Strapping

Signode PNSC-2 Pneumatic Push-Type Combination Tool for Steel Strapping

The Signode PNSC-2 is a pneumatic push-type combination steel-strapping tool for regular-duty and high-tensile steel straps of width 1/2 to 3/4 inch. This combo tool weighs just 9.5 lbs and is capable of generating up to 700 lbs of tensioning force. It delivers a single reverse notch seal. It is widely popular for its duck bill nose which is used for pushing the seal. Its feedwheel pulls tension and the jaws will notch the seal into place.

Applications of Signode PNSC-2

The PNSC-2 is a powerful Pneumatic Combination tool that is ideal for use on irregular and round packages and loads. Due to its dual-button control system, this pneumatic steel-strapping tool is extremely easy to use. It will easily slide out after completing each strap cycle. It is a highly durable tool with metal alloy construction, and is capable of delivering high output in even the harshest conditions.

Technical Specifications

The main technical specs of the PNSC-2 Tool are as following:

  • Strapping Type: Regular-duty & high tensile steel strapping
  • Strapping Size: Width 1/2 to 3/4 inch, thickness 0.017 to .025 inch
  • Weight: 9.5 lbs (4.3 kg)
  • Peak Tensioning Force: 700 lbs (3,114 N)
  • Seal Type: Single reverse notch

Features of PNSC-2

There are many features of the PNSC-2 Tool that make it stand out. This includes:

  • Proven Design – Its design is based on Signode’s most successful strapping tool, the PNSC. It is an improvement over it.
  • Lightweight – This tool is both lightweight and powerful. The operator is able to wield more power in his hands without having to lift too much weight.
  • Single-hand Operation – Its dual-button operation helps in increasing productivity, making it a single-hand tool. Operators can achieve highly reliable performance in highly demanding situations.
  • Optimal Joint Strength – Thanks to its single reverse notch seal joint, you will achieve maximum joint strength.
  • Minimal Maintenance –All metal-alloy parts means the tool requires minimal maintenance and lasts longer.

This Pneumatic Combination tool is designed for boosting efficiency by eliminating the need for operator efforts. This helps in eliminating fatigue.

Wear Parts & Accessories

All the wear parts, accessories and replacement parts for the PNSC-2 can be readily ordered online. The most common wear parts of this pneumatic combo tool include feedwheel, side plate spacer, worm gear, and vane.

Overall, the PNSC-2 is an improvement over the highly successful Signode PNSC. It is a powerful, lightweight pneumatic combo steel strapping tool that is perfectly suited for the most heavy-duty applications.